Jeep Liberty – Four Wheel Trends

If Your Jeep Beeps When You Start It, Read This Guide It’s your day off and you’re ready to take some friends out to dinner in your Jeep. You put the key in the ignition, start the engine, and that’s when you hear some unusual beeps. You haven’t heard these beeps before so you start to wonder what they could be and why does my jeep beep when I start it? The first thing you want to notice is how many beeps are sounding when you turn on the Jeep. Was it just one beep? Or maybe it was three or more beeps? It might be helpful to turn off and turn on the Jeep so you can count the beeps. The good news is, there are several reasons for these beeps. Here are a few items to be on the lookout for when the beeps happen: The seatbelt is on.“Check Gauges” light is lit up on the dashboard.The gas level is low.The temperature outside is cold therefore affecting the oil temperature and pressure.It’s time for an oil change.The Oil pressure sensor has gone bad.A bulb needs to be replaced. Hearing unusual sounds in your car, especially one that you really love, can be alarming and stressful. Let’s be honest, car trouble never comes at the right time and you’re never ready for it to happen. That’s why it’s good to be informed and know what could be happening by doing some research. This way you can get your Jeep free of unusual beeps and get back on the road. What to Check For Here is a closer look at each of those above points so you can start troubleshooting the beeping sounds thoroughly. Go through each one to see if they help solve the problem. Are seatbelts on? Safety is key and very important. Make sure your seatbelt is on before you start moving in your vehicle. You’ll hear one beep if the seatbelts are on and more beeps if the seatbelts are not on. Always make sure you fasten your seatbelt as soon as you get into the car. It’s a good habit to get into and it can also help reduce the number of beeps you hear upon starting your Jeep. It’s a win all around. When you start your Jeep, see if the “Check Gauges” light is on when you look at the dashboard. If it is on, you’ll want to check your dashboard to see if anything seems unusual or different than you’re used to seeing. Look around the dashboard and take notice carefully: How does the temperature gauge look?What about the oil pressure gauge?How is the battery voltage looking? See if any of those lights stay on or are a different color than they usually appear to be. Check your owner’s manual to see what the symbols look like for these gauges and what they should normally look like. You might find that one of those gauges is out of range and could be the source of the beeps you’re hearing. Take note of which one or ones are acting up so you can be better prepared to fix the issue. If your gas tank is low and needs to be filled up your Jeep will sound a beep to let you know it’s time to fill up. Check the gas gauge to see how full or low your gas is. If you’re close or nearing empty, then it’s time to go and fill up at your nearest gas station. Your Jeep will give you a reminder beep that it’s time to fill up even when you’re driving. Make sure you pay close attention to these alerts at all times. Ignoring the gas tank alerts can result in running out of gas when you’re not close to a gas station. When the temperature outside starts getting cold, the oil in your Jeep might need some extra time to warm up to the optimal temperature. When the oil temperature warms up to the right temperature it also increases the oil pressure in the vehicle. If the oil pressure is not at the right level on those very cold days, you might hear a beep letting you know this. During cold days you might want to give your Jeep a few extra minutes to warm up and reach the right oil temperature and pressure. An oil change and new filter can help get rid of that pesky beeping sound when you start up your Jeep. Make sure you follow your owner’s manual for the type of oil and oil filter to use for your particular model of Jeep. Quality parts and regular maintenance will keep your Jeep running well year to year. Keep track when your oil should be changed. Depending on the type of oil you use it could be a range of miles or months, whichever comes first. When in doubt, check with the dealership to see what type of oil, filter, and schedule they recommend for your vehicle. Your oil pressure sensor could be bad. Yes, there is an actual oil pressure sensor in your Jeep. And sometimes that oil pressure sensor can go bad, get loose, or just plain get old. If this happens, you’ll want to replace the sensor with a new one. Getting and installing a quality part can help prevent the beeping from returning in the future. There may be a bulb that needs to be replaced. There are many different bulbs in many different areas on your vehicle. Check all around the vehicle to see if there are any bulbs that are out or have gone bad. Don’t forget about the left and right signals and even the high-beams. And while you’re at it, check the interior bulbs too. Even the license plate bulbs should be looked at. 2020 Jeep® Renegade Trailhawk It might be good to have someone help you with this so they can check the brake lights while you press the brakes. Having all bulbs in good working order is not only helpful for keeping you safe while you drive but it also helps other travelers on the road be able to see you. This is especially important at night and in bad weather. Replace these bulbs as soon as you possibly can. Warranty Your Jeep may still be under some type of warranty. Check with your dealership or look through your records to see when the warranty ends. It might be by a certain number of miles or a specific date so make sure you check both if applicable. If the Jeep is still under warranty, it might be a good idea to make an appointment at your local dealership to have them take a look at the Jeep. They might be able to fix the problem for you at no additional cost as long as it’s covered under the warranty. Check for Recalls While you’re at the dealership, ask them to check for any recalls on your model of Jeep. The beep may be part of a recall. You might be entitled to have the work done at no charge if the issue falls into the recall category. Service Many people have trusted mechanics they work with for problems like these. When bringing your car to your mechanic, try to be as detailed as possible about the issues you’re having so they can focus on the problem at hand. Take Control Alternatively, if you’re comfortable tackling the above steps on your own, go for it. Some steps may require special tools that you may need to purchase in order to complete the task. Doing some research first before you get elbow deep into a project would be helpful to have the project run smoothly and without unexpected surprises. Maybe take some pictures before and during the project so you can reference them when you put everything back together. Labeling items can help too. You don’t want to get to the end of a car project with one extra screw and not know where it goes. Ask Internet Friends If you’ve gone through the different steps above and you still have the beeping, you could try posting your question on a blog or forum. These are good places for people to post their issues and connect with people all over that might be having the same problem. There are many forums for Jeep owners that you can post your questions and likely someone out there will have some knowledge to share with you. When All Else Fails If the beeps are still happening and you’ve exhausted the above troubleshooting steps, advice from forums or even working with a trusted mechanic, it might be time to bring your Jeep to your local dealership even if you don’t have a warranty. Make sure you tell them exactly when the beeps are occurring and how many beeps there are. The more information you can provide, the better. It might even be helpful to take a short video of the beeps this way you can show them exactly what is happening and when it happens. Good luck!